Assembly instruction, Remove firebox from cabinet – Kenmore 119.16312800 User Manual
Page 10
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Assembly Instruction
Remove Firebox from Cabinet
□
Unscrew and discard the
6
Phillips Head Bolts and Washers from the corner holes of the cabinet.
Remove the crossbar.
□
Carefully lift the cabinet up from the firebox and set on cardboard. Remove all foam packing from
cabinet.
□
Cut fastening straps on lid handle. Raise lid and remove and unpack parts inside firebox.
Crossbar
Instaii Control Knobs and Casters
□ Push the Main Burner Control Knobs and Back Burner Control Knob onto the valve stems.
See Inset 1. The small knob goes onto the labeled valve stem for the rôtisserie burner,
d Place the Cabinet Assembly upside down and attach the 4 Casters to the bottom using 16 Phillips
Head Bolts (M
6
xl
6
mm). Use care to install each Caster into the correct position. See Inset 2.