Pre-assembly instructions for your safety, Grill installation codes, Electrical grounding – Kenmore 119.163018 User Manual
Page 3
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Pre-Assembly Instructions For Your Safety
lA
DO NOT light this grill without first reading
the Lighting Instructions.
DO NOT light this grill without checking the
burner tubes for blockage that could have
occurred during shipment. See the Cleaning
and Maintenance Instructions.
Grill Installation Codes
The Installation must conform with local codes or,
in the absence of local codes, with either the
National Fuel Gas Code, ANSI Z223.1/NFPA 54,
or CAN/CGA B149.1, Natural Gas and Propane
Installation Code, or Propane Storage and
Handling Code, B149.2.
DO NOT use any type of charcoal In this grill.
DO NOT operate the main burners and back
burner at the same time. (If Equipped)
ALWAYS inspect the grease tray before each
use. Remove and clean as necessary.
Electrical Grounding
All electrical accessories (such as a rôtisserie or
light) must be electrically grounded in accordance
with local codes, or In the absence of local codes,
with the National Electrical Code, ANSI/NFPA 70,
or the Canadian Electrical Code, CSA C22.1. Keep
any electrical cords away from hot surfaces.
A
Æ
This outdoor cooking gas appliance is not
Intended to be Installed in or on boats or
recreational vehicles.
A
Liquid Propane Gas (LPG) grills must be used with
the liquid propane gas regulator assembly supplied.
Natural Gas grills must be used with natural gas
only. Any attempt to convert the grill from one fuel
type to another is extremely hazardous.
ALWAYS keep the gas hose assembly away from
any heated surface and dripping grease. Avoid
unnecessary twisting of the hose. Visually
inspect the hose prior to each use for cuts,
cracks, excessive wear, or other damage. Do not
use the gas grill If the hose appears damaged.
Call Sears at 1-800-4-MY-HOME®
(1-800-469-4663) for a Kenmore replacement gas
hose assembly.
PRE-ASSEMBLY
• Tools required for assembly include:
. Protective work gloves and eyewear
. Phillips head screwdriver (included in hardware
pack)
• Two people will be necessary to assemble the
larger parts of the grill,
• Lay a cardboard sheet on the floor and use as a
work surface to protect floor and grill parts from
scratches.
• Once all parts are removed and unpacked, use the
Hardware and Part Diagrams to ensure all items are
included and free of damage.
• Do not assemble or operate your grill if something
appears damaged. If you have damaged or missing
parts, or questions during assembly, call
1-800-933-0527
8:30am-5:00pm CST, Monday
through Friday.