Remove firebox from cabinet, Assembly instruction – Kenmore 119.163018 User Manual
Page 10
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Assembly Instruction
Remove Firebox from Cabinet
□ Unscrew and discard the 6 Phillips Head Bolts and Washers from the corner holes of the cabinet.
Remove the crossbar.
d Carefully lift the cabinet up from the firebox and set on cardboard. Remove all foam packing from
cabinet.
□ Cut fastening straps on lid handle. Raise lid and remove and unpack parts inside firebox.
Instaii Control Knobs and Casters
□ Push the Control Knobs onto the valve stems. See Inset 1.
□
Place the Cabinet Assembly upside down and using 16 Phillips Head Bolts (M6xl6mm) attach the 4
Casters to the Cabinet Assembly bottom. Use care to instaii each Caster into the correct position.
See Inset 2.