Install side shelf frame to firebox – Kenmore 119.163018 User Manual
Page 16
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Install Side Shelf Frame to Firebox.
□
Unscrew the 2 Phillips Head bolts
^k"
from the upper left and right corner holes in the right side of
the firebox as shown in Inset 1. The bolts extending out of the firebox sides are to attach the side
shelf frame.
□
Slide the upper holes of the side shelf frame over the heads of the 2 Phillips Head Bolts and drop
down.
□
Use 2 Phillips Head Bolts (M6xl6mm) and 2 Washers (M6) to attach the lower holes In the side
shelf frame to the firebox as shown In Inset 2. Tighten the upper bolts after the 2 lower bolts are
tight.
□
Use 2 Phillips Head Bolts (M4x8mm) and 2 Lock Washers (M4) to attach the lower holes in the Side
Shelf Front Panel to the firebox. See Inset 3.
Inset 1
Inset 2
Phillips Head Bolt MSxlSmm
Qty: 2
Lock Washer: M6
Qty: 2
Phillips Head Bolt M4xSmm
Qty: 2
Lock Washer M4
Qty: 2
Install Heat Diffuser, Cooking Grates, and Warming Rack
□
Place the Heat Diffuser Into the firebox between the ridges in the front and back panels. See Inset
1
.
n Place the Cooking Grates Into the firebox. The grate bottoms have a small knob on each corner. See
Inset 2.
□ Insert the Warming Rack into the holes of firebox side panels as shown. See Inset 3.
Inset 1
Inset 3
Inset 2