Manually lighting the side burner, A: a a – Kenmore 119.163018 User Manual
Page 23
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
MANUALLY LIGHTING THE BURNERS WITH
THE MATCH HOLDER
1. Open the lid.
2. Ensure all burners are in the "OFF" position.
3. Slowly turn on the gas at the LP cylinder
valve if it is not already on.
4. Place a match In the match light stick. This is
located inside the left cabinet door.
5. Use the stick to slide the lit match through
the cooking grates and the front of the heat
diffuser to the burner you wish to light.
6. Press and turn the burner control knob to
"Hi". Continue to push in and hold up to 5
seconds or until the burner lights.
7. If the burner does not light within 5 seconds,
turn the burner control knob to
"OFF". Wait 5 minutes for gas to clear, and try
again.
8. When lit, turn the control knob to the desired
heat setting.
MANUALLY LIGHTING THE SIDE BURNER
1. Open the side burner cover.
2. Ensure the control knob is in the "OFF"
position as well as any main burner not in
use.
3. Slowly turn on the gas if it is not already
on.
4. Strike the match, and place near the top
of the burner.
5. Turn the control knob to "Hi"
6. If the burner does not light within 5
seconds, turn the burner control knob to
"OFF". Wait 5 minutes for the gas to clear,
and try again.
7. When lit, turn the control knob to its
desired setting.
^ A:
A A
1. Do not use charcoal briquettes, lava rock,
Never
lean over the grill cooking area while
or any type of ceramic product In this grill.
lighting your gas grill. Keep your face and body
2. Do not put a barbecue cover or other
a safe distance (at least 18 inches) from the
flammable material in the storage area of
lighting hole and burners when lighting your
this grill.
grill with a match.
23