beautypg.com

Consumer defined control, Setting oven lockout feature, Instructions – Kenmore 790.4101 User Manual

Page 19: To activate the oven lockout feature, To reactivate normal oven operation, Press, For3, Seconds, Display, Setting silent control operation

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

background image

Consumer Defined Control

Note: The Consumer Defined Control features are adjustments to the control that will not affect cooking results. These
include the Oven Lockout, Temperature Display and Silent Control Operation features

Setting Oven Lockout Feature

The pad controls the Oven Lockout feature. The Oven Lockout feature automatically locks the oven door and

prevents the oven from being turned on. It does not disable the clock, Kitchen Timer or the interior oven lights.

INSTRUCTIONS

To activate the Oven Lockout feature

1. Press and hold (

stop

)for 3 seconds.

2. After 3 seconds "Loc" will appear, a beep will sound and

"DOOR LOCKED" will flash in the display. Once the oven door
is locked the "DOOR LOCKED" indicator will stop flashing and
remain on along with the "Loc" (Figure 1).

To reactivate normal oven operation:

1. Press and hold for 3 seconds. A beep will sound. The

"DOOR LOCKED" will flash in the display until the oven door
has completely unlocked (Figure 2).

2. The wall oven is again fully operational.

PRESS

[ ^ ^ f o r 3

seconds

[ ^ ^ f o r 3

seconds

DISPLAY

L O C

Figure 1

Figure 2

Setting Silent Control Operation

The DELAY TIME

and FLEX CLEAN

pads control the Silent Control operation feature. The Silent Control

operation feature allows the oven control to be operated without sounds or beeps whenever necessary. If desired the control
can be programmed for silent operation and later returned to operating with all the normal sounds and beeps.

INSTRUCTIONS

PRESS

DISPLAY

To change control from normal sound operation to
silent control operation

1

.

2

.

To tell if your range is set for normal or silent operation press

and hold

will appear and "DELAY" will flash in the

display (Figure 3). After 7 seconds "SP" (Speaker) will appear in
the display (Figure 4).

Press to switch between normal sound operation and

silent operation mode. The display will show either "SP" (Figure

4) or":-" (Figure5).

If "SP" appears (Figure 4), the control will operate with normal

sounds and beeps. I f a p p e a r s (Figure 5), the control is in

the silent operation mode.

3.

Press . START 5 to accept the change or press

change.

I to reject the

Figure 3

for 7 seconds

Figure 4

Figure 5

, START or (STOP

Note: The control will always beep at the end of a kitchen timer and will beep when a set temperature has been reached,
even if the control is set to silent operation.

19