Kenmore 911.94752 - Manual (Page 29)

CARE Am CLEANING
Removable Parts THE OVEN EIGHT BULB
CLEANING MATERIALS
• Dishwashing detergent
• Warm water
• Soft cloth
Molded
TO REMOVE
1. Be sure the control knob is in
the off position
2. Puli straight off the stem
Using a piece of siring can make
removing the knob easier Slip the
siring under and around the knob,
puiling straight out
TO CLEAN
Wash the knob thoroughly with soapy
water. Dry completely with a soft
doth, DO NOT let the knob soak.
TO REPLACE
1. Check the back of the knob.. The
molded rib of the knob is de­
signed to fit perfectly onto the
knob stem
2. Align the molded rib to the clear
groove in the knob stem.
3. Push the knob back as far as it
wilt go
CAUTION: Disconnect
electrical power to the
oven at the main circuit
breaker or fuse box before
attempting to replace the oven
light bulb. Do not touch a hot
light bulb with wet hands or a
wet cloth. Walt until the bulb has
COwi©C# SliiCi Uo© 3 ^*jr CiiO%n«
Bail
Wire
Live Collar
Light Bulb
Bulb Cover
TO REPLACE
1. Hold your hand under the bulb
cover and firmly push back the
bail wire, until it clears and
releases the bulb cover.
2. Unscrew the light bulb.
3. Replace the bulb with a 3V2‘
40-watt appliance bulb.
4. Place the bulb cover into the
grooves of the socket and puli
the bait wire forward until it rests
in the indentation on top of the
bulb cover
90
mm