Operation, Clock and timer – Kenmore 911.94752 User Manual
Page 15
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
OPERATION
Clock and Timer
(2)0)
uuc,
©0
e
1. Touch the CLOCK pad
until display flashes,
2.
Touch the HOUR/MIN UP
or DOWN arrow pads to
set the time of day.
3. Touch the CLOCK pad.
V
CLOCK
Alter releasing the arrow pad, the
TIMER indicator light wil! blink three
to five times. The countdown will
automaticaily begin The TIMER
indicator light will remain on until
the countdown reaches “0 "
When the timer has started the
countdown, you may touch the
CLOCK pad to return to the current
time of day.
At the end of the countdown, the
control wii! beep and the TIMER
indicator iight will flash Touch the
TIMER ON/OFF pad
REMINDER!
If you hesitate while touching the
arrow pads, the display and the
TIMER indicator lights will blink
3 times and return the display to
the time-of-day clock. If this
happens, touch the TIMER
ON/OFF pad to start over.
The Timer is used to time cooking
processes or other household
activities it does not control the
oven. It can be set for up to 11
hours and 59 minutes, it will count
down in minutes until the LAST 60
SECONDS is reached, then the
control will beep once. When the
countdown reaches ZERO, the
control will beep 3 times followed by
one beep every 6 seconds until the
TIMER ON/OFF pad is touched.
Touch the TIMER ON/
OFF pad. "0.00” and
the TIMER indicator light
will flash..
Touch the HOUR/MIN UP
or DOWN arrow pads to
set the amount of time
If you decide to change your set time;
if the countdown is showing in the
display, touch the HOUR/MIN UP
or DOWN arrow pads Select the
new time.
II ii^g time-of-day clock is showing
!n the display, touch the TIMER ON/
OFF pad. Then, touch the HOUR/MIN
UP Of DOWN arrow pads. Select the
new time
If the countdown is showing in the
display, simply change the time if it
isn’t, touch the TIMER ON/OFF pad,
then touch the TIMER ON/OFF pad
to cancel.
15