Kenmore 119.1643301 User Manual
Page 8
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Assembly Instruction
Remove Firebox from Cabinet
□
Cut fastening straps on Cabinet Toe Piate. Remove the Toe Piate and set aside. Cut fastening
straps securing regulator and hose to cabinet.
□
Unscrew and discard the 8 Phillips Head Bolts (M6x35mm) and 8 Washers (M6) from the corner
holes of the cabinet. Remove the crossbar and set aside.
□
With the aid of an assistant, carefully lift the cabinet up from the firebox and set aside. Remove
all foam packing from the Firebox. Raise lid and remove and unpack parts inside Firebox.
Cabinet Front Crossbar
Cabinet Toe Plate
\ .*••*/•**
♦
4
•••à.
Install Casters to Cabinet
□ Place the Cabinet Assembly upside down and attach the 4 Casters to the bottom using 16 Phillips
Head Bolts (M6xl6mm). Install both locking casters on rear of cabinet.
Swivel Caster
Phillips Head Bolt M6xl6mm
Qty: 16