Kenmore 119.1643301 - Manual (Page 22)

USE AND CARE INSTRUCTIONS
Grill Lighting Instructions
1. Before each use, check all hoses for cracks,
nicks, cuts, or abrasions. If a hose Is
damaged In any way, do not use your grill
before replacing the hose with an
authorized part from the Parts List. Also
make sure all gas supply connections are
securely tightened.
2. Familiarize yourself with the Safety and
Use and Care Instructions In this manual.
Do not smoke while lighting the grill or
checking gas supply connections.
3. Be sure the LP gas tank has gas.
4. Open the grill lid.
Æ
Failure to replace a faulty hose, secure gas
supply connections, or to open the lid before
proceeding to the Lighting Procedures could
result In a fire or explosion that could cause
serious bodily Injury, death, or property damage.
Set control knobs to OFF and open the LP
gas tank valve SLOWLY.
Rôtisserie Burner Electric Ignition
Side Burner and Rôtisserie Burner
Lighting Instructions
1. Follow steps 1 through 3 of the Grill
Lighting Instructions.
2. Open the grill lid or side burner cover.
3. Set control knobs to OFF and open the LP
gas tank valve SLOWLY
4. Push and turn the control knob to "Fll".
/Hi
V
Low
Push and turn any control knob to "Fll".
/Hi
V
Low
7. Immediately press the electronic ignition
button for 3-5 seconds to light the burner.
You should hear a clicking sound which
shows the electronic ignition is working. If
the burner does not light within 5 seconds,
turn the burner control knob to "OFF". Wait
5 minutes for the gas to clear, and repeat
the above procedure.
8. Once one burner is lit, an adjacent burner
can be lit by turning its control knob to "Fli".
9. When lit, turn the control knob to its
desired setting.
5. Immediately press the electronic ignition
button for 3-5 seconds to light the burner.
You should hear a clicking sound which
shows the electronic ignition is working.
5. If the burner does not light within 5
seconds, turn the burner control knob to
"OFF". Wait 5 minutes for the gas to clear,
and repeat the above procedure.
7. Continue to press in and hold the rôtisserie
burner control knob for 5 to 7 seconds
once lit to activate the safety flame sensor.
Failure to do so will cause gas to be shut
off to the rôtisserie burner and the burner
will go out.
Side Burner
22