Kenmore 119.1643301 User Manual
Page 14
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Install Side Shelf Frame to Firebox
□
Unscrew the 2 Phillips Head bolts
V
a
inch from the upper left and right corner holes in the right
side of the firebox as shown in Inset 1. The bolts extending out of the firebox sides are to
attach the side shelf frame.
□
Slide the upper holes of the side shelf frame over the heads of the 2 Phillips Head Bolts and
drop down.
□
Use 2 Phillips Head Bolts (M6xl6mm) to attach the lower holes in the side shelf frame to the
firebox as shown in Inset 2.
□
Use 1 Phillips Head Bolt (M4x8mm) to attach the lower hole in the Side Shelf Control Panel to
the firebox. See Inset 3.
□
Tighten the 2 previously loosened Phillips Head bolts.
Phillips Head Bolt M6xl6mm
Qty: 2
Inset 1
S-
Inset 2
Phillips Head Bolt M4x8mm
Qty: 1
♦
♦
Inset 3
14