Kenmore 119.1643301 - Manual (Page 16)

Install Side Burner Valve
□ Detach side burner ignition wire from the reguiator hose. Feed side burner vaive and igniter
wire through hoie in ieft side of cabinet.
□ Open side burner iid and cut tie wrap securing grate to pan. On underside of pan, remove the 2
screws hoiding the side burner in piace. See Inset 1.
□ Secure the side burner vaive stem to the Side Burner Lower Controi Panei using 2 Phiiiips Head
Boits (M4x8mm). See Inset 2.
□ Center the side burner vaive into the side burner tube. See Inset 3. Reattach side burner to pan
with 2 previousiy removed screws.
□ Use 1 Phiiiips Head Boit (M4x8mm) to attach the Side Burner Lower Controi Panei to the firebox.
See Inset 4.
^ Inset 1
►* %
Inset 2
Phiiiips Head Boit M4x8mm
Qty: 3
j]
Inset 4
Inset 3
Attach Side Burner Control Knob and Side Burner Ignition Wire
□ Attach the side burner ignition wire over the side burner connector pin.
□ Push the Controi Knob onto the vaive stem.
-.....................
16