How the cycle works, Setting the controls, I l i – Kenmore 665.75832 User Manual

Page 28: J u > i l

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

HOW THE CYCLE WORKS

i The SELECT CLEAN Self-Cleaning cycle uses
I temperatures much hotter than normal oven use to
j break up and burn away soil and grease. SELECT

I CLEAN will set the clean time automatically, once
j you choose the soil level. Vbu can choose SoilL
I (light soil), SoilA (average soil) or SoilH (heavy soil).
I SoilL will clean for approximately

2-2'A

hours, SoilA

I for 3-3Ji hours and SoilH for

4-4A

hours.

The door must be closed completely for it to lock and

the cycle to begin. If properly closed, the door will

lock approximately 6 seconds after START/ENTER is
pressed. The cycle time includes an approximate 30

minute cool down time. To see the time of day during

the cycle, press CLOCK for 5 seconds.

SETTING THE CONTROLS

. Press SELECT CLEAN.

Press pad twice, SoilA (for average soil) will
replace SoilL.

Press pad three times, SoilH (for heavy soil) will

replace SoilA.

NOTE:

You can scroll through all 3 settings

(SoilL, SoilA and SoilH) continuously by pressinq

SELECT CLEAN.

PRESS

iSELECrl

CLEAN

YOU SEE

S o

i l i

(example shows light soil

setting)

2. Press START/ENTER,

PRESS

START

ENTER

YOU SEE

r t n ' ~ n I t

" J U > I L

clean

3. After the SELECT CLEAN Self-Cleaning cycle ends:

LOCKED goes off and the door unlocks.

Press any pad or open the door to remove “End”

and bring back time of day.

YOU SEE

i j n

t ’ J I U

5. After the oven is cool, wipe off any residue or ash

with a damp cloth or sponge.
If needed, touch up spots

with a mild abrasive cleanser
or cleaning sponge.

This manual is related to the following products:

665.75837 665.75839