Kenmore 665.75832 - Manual (Page 37)

Troubleshooting
Most cooking problems are caused by little things you can find and fix without tools of any
kind. Check the lists below and on the next page before calling for assistance or service.
RANGE DOES NOT WORK
PROBLEM
Nothing works
CAUSE/SOLUTION
• The range is not plugged into a properly grounded outlet (120v polarized).
• The range is not properly connected to the gas supply. Contact a Sears
Service Center to reconnect the range to the gas supply. (See the Installation
Instructions.)
• A household fuse has blown or a circuit breaker has been tripped.
• The Oven and Cooktop Lockouts have been set.
OVEN/BROILER BURNER
PROBLEM
The oven does not work
Burner makes muffled
ticking noise when in use
The burner fails to light
The burner flames lift
away from the ports, are
yellow, or are noisy
CAUSE/SOLUTION
• The electronic controi is not set correctiy. Refer to setting the eiectronic
oven controi section. (See pp. 11-24.)
• A delay start has been set. Wait for the start time to be reached or cancei
and reset the controi.
• The main or regulator gas shutoff valve is in the off position. (See the
Installation Instructions.)
• The Oven Lockout has been set.
This is normai. This sound occurs when the oven burner cycies on and off
to hold the set oven temperature.
• The ignition system is broken. Contact a Sears Service Center to repiace it.
• A househoid fuse has blown or a circuit breaker has been tripped.
• The air/gas mixture is incorrect. Contact a Sears Service Center to check the
air/gas mixture or see the Installation Instructions.
continued on next page
37