Releasing the handle, Touch control – Kenmore 116.36932 User Manual
Page 8
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
RELEASING THE HANDLE
Release the handle hy pressing dawn on
the handle reteesa pedal with your foot and
puling back and down on the handle with
your hand.
Note: The agitator does not rotate when the
vacuum cleaner is in the upright position.
TOUCH CONTROL
inteliCLEAN - Turns ON the vacuum
cleaner in inteliCLEAN mode.
SliCTIONfTOOLS - Changes the suction
level of the vacuum cleaner motor, if the
vacuum cleaner Is OFF and locked in the
upright position pressing the SUCTION
button turns ON only the vacuum cleaner
motor to HIGH for cleaning of most car
pets, rugs and fabrics. The agitator starts
(in HIGH speed) when the vacuum cleaner
IS
lowered into the operating position.
Pressing the SUCTION button cycles the
vacuum cleaner motor through suction levels.
H.M.L. = HIGH, MEDIUM, LOW
GENTLE/FLOOR - Turns ON the vacuum
cleaner motor to HIGH suction level and
the agitator motor to LOW speed level for
gentle cleaning of most delicate carpets
and rugs. Pressing the GENTLE/FLOOR
button a second lime turns OFF the agita
tor motor for cleaning bare floors. In order
to gel MEDIUM and LOW suction levels for
cleaning, press the SUCTION button to
cycle the vacuum cleaner motor through
MEDIUM, LOW, and HIGH suction levels
respectively.
CARPET - Turns ON the vacuum cleaner
motor to HIGH suction level and the agita
tor motor to HIGH speed level for cleaning
of most carpets and rugs. In order to get
MEDIUM and LOW suction levels for
cleamng, press the SUCTION button to
cycle the vacuum cleaner motor through
MEDIUM, LOW, and HIGH suction levels
respectively,
OFF - Turns OFF vacuum cleaner.