beautypg.com

Gentle sweep function, A caution – Kenmore 116.36932 User Manual

Page 10

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

background image

GENTLE SWEEP FUNCTION

Your Kenmore Vacuum Cleaner features a
two (2) speed, direct drive agitator for
oSeaning a variety of floor surfaces. Please
review the table below before using your
vacuum cleaner

1, Do not use the

CARPET

setting (high

speed) for cleaning barber style car­
pet. The high agitator speed could
damage the carpet or cause excessive
carpet wear

2. Use the GENTLE setting (low speed)

ONLY for berber or delicate pile car­

peting. The agitator may slow down or
stop on thick carpeting, area rugs or
throw rugs, if agitator stops and does
not restart, see AGITATOR MOTOR
OVERLOAD PROTECTOR

3.

The

FLOOR

setting may be used for

all indoor bare floors including wood,

tile, linoleum, slate etc.

Touch Control

Setting

Agitator

^ |«rvK\7v4

Bare

Floor

Commercial

or Low Pile

Berber

or Delicate

Carpet

Plush

Shag

Area

Rug

Carpet {1j

High

Gentle (2)

Low

Floor (3)

Off

To select a pile height setting:

Turn off vacuum cleaner. Select a pile

height setting by tilting the vacuum

cleaner back until front wheels are lifted
slightly off the floor

Slide the adjustment lever to the correct
setting.

There are four (4) pile height settings on
the vacuum cleaner. Use the

LOW

setting

for most low-pile carpets and bare floor

cleaning (with agitator

OFF),

and the

HIGH setting for high-piie carpets iike

shag carpet, scatter rugs, etc. Use the
other settings as needed for carpet
heights in between.

A CAUTION

Do not allow vacuum cleaner to remain
In one spot for any length of time

when the agitator is turning. Damage
to carpet may occur. _______________

10

This manual is related to the following products: