Exhaust filter replacement – Kenmore 116.36932 User Manual
Page 19
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
TO REPLACE DUST BIN LID
Rspisc© dust bin lid asssmbly by placing
back on dust bin with marks on the lid
aligned as shown under Open (For
Emptying) on the back of the dust bin.
Turn This Pirection
Rotate clockwise while pressing downward
so marks align as shown above dosed
(For Use).
Insert dust bin
into vacuum
cleaner.
Lower the dust
bin handle to
lock dust bin In
place.
A noticeable
"click" should
be heard.
Dust Bin
Handle
EXHAUST FILTER REPLACEMENT
The HEPA exhaust filter must be replaced
when dirty. It should be replaced regularly
depending on use conditions
The filter CANNOT be washed as it will
lose its dust trapping ability«
Note: See PARTS AND FEATURES
for the exhaust filter number.
Remove exhaust filter cover by pressing
the release tab on the cover and rotating
out from vacuum cleaner
Remove
the filter
cartridge
from cover
Place new filter cartridge into cover making
sure that airflow arrow on side of cartridge
points into cover.
Place the foam seal of the filter should
be placed against the vacuum cleaner
body.
Replace the exhaust filter cover by placing
bottom tabs in slots and rotating in until
cover snaps into place.
19