Agitator motor overload protector – Kenmore 116.36932 User Manual
Page 14
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
PERFORWfANCE/SAFETY FEATURES
MOTOR PROTECTION SYSTEM
Motor Protector
This vacuum cleaner has a motor protector
by-pass vaive which automatically opens to
provide cooling air to the vacuum cleaner
motor when a clog prevents the normal
flow of air to the motor. If the by-pass valve
opens to prevent motor overheating and
possibie damage to the vacuum cleaner,
you will notice a change of sound as air
rushes through the valve opening.
To correct problem empty the dust bin*
If using attachments, adjust to allow for
greater air flow.
NOTE:
The motor
protector may open
when using
attachments or
when cleaning new
carpet, due to
reduced airflow
caused by the
attachments
themselves or by
new carpet lint filling the dust bin quickly.
To correct problem empty the dust bin.
If using attachments, adjust to allow for
greater air flow.
Note: Do not block motor protector.
Thermal Protector
This vacuum cleaner has a thermal
protector, which automatically trips to
protect both the vacuum cleaner and the
agitator motor from overheating. If a clog
prevents the normal flow of air to the motor,
the thermal protector turns the motor off
automatically. This allows the motor to coot
in order to prevent possibie damage to the
vacuum cleaner.
Motor
Protector
(Behind Hose)
To correct problem:
Turn the vacuum
cleaner off and unplug the power cord from
the outlet to allow the vacuum cleaner to
coo! and the thermal protector to reset.
Check for and remove clogs, if
necessary. See CLOG REMOVAL
section. Also check and replace any
clogged filters. Wait approximately thirty
(30) minutes before restarting vacuum
cleaner.
AGITATOR MOTOR
OVERLOAD PROTECTOR
The agitator motor has built-in protection
against motor damage should the agitator
jam. If the agitator stows down or stops, the
agitator overload protector shuts off the
agitator motor. The vacuum cleaner motor
will continue to run
To correct problem;
Turn off and unplug
vacuum cleaner, remove obstruction, then
press Agitator Motor reset button.
If the problem
persists, have the
vacuum cleaner
serviced by a
Sears or other
qualified
technician.
Agitator
Motor
Reset Button
14