Kenmore 116.36932 - Manual (Page 17)

^^VVARNING
Always unplug power cord from elec<
trical outlet before performing any ser­
vice on vacuum cleaner.
TO REMOVE DUST BIN
Lift dust bin handle located at the top of
the dust bin .
ûust Bln
Hmd/e
Pull the handle up
and lift dust bin up
and out of the vac­
uum cleaner.
Dust
Bin
Remove any ciogs that might be located in
the suction port or filter port area.
Suction
Filter Port
TO EMPTY DUST BIN
Before removing debris from dust bin it is a
good idea to move the dust bin filter clean­
ing fever back and forth several times.
Dust Bln
Filter
Cteming
Lever
Moving the lever
back and forth
loosens the dust
and debris that
has attached
itself to the filter
element inside
the dust bin,
Rotate dust bin handle to the vertical posi­
tion
Hold dust bin
over a trash
container.
Press the dust
bin door
release button
downward to
release the
door.
Dust Bln
Handle
Dust Bin
Door
Release
Button
The door will
swing open
and the debris
Will fail into the „ ^
. , , . Dust Bin -
trash container. Emptying
Door
Shake the dust bin to release any debris
that might hang In the filter element
Note; See PRIMARY FILTER REMOVAL
AND CLEANING section
After the dust bin is
empty of debris,
firmly close the
door. Make sure
you hear a “click”
sound to indicate
that the door is fully
latched.
Door Door
L^ich
TO REPLACE
DUST BIN
Place dust bin back
into vacuum cleaner
by inserting the bot­
tom first and tilting
back with the dust bin
handle raised
Oust Bln
Handle
¡Lower the dust
bin handle to
lock dust bin in
place.
A noticeable
“oiick” should
be heard.
17