Kenmore 116.36932 - Manual (Page 12)

Extend the wand to its fuK length Turn the
iocking ring to the LOCK position. Attach
the wand onto the open end of the hose.
Lower
Wand-"~~^^
Suction
Control Slide
Wiind
\ locking Ring "
Upper
Wand
Align the labs on the wand with the “J”
slots in the hose Push the wand into the
hose and twist to the right to lock
/ irw n.
Suction
Slide Control
Raised
Tab
Crevice-
Tool
To achieve maximum reach with the
attachments, add the crevice looi to the
end of the wand by inserting and twisting
slightJy
The combination brush can be attached
directly to the wand.
Brush
Combination
Brush
Brush
Haider
Use the brush holder without the brush for
greater suction on furniture cushions or
stairs. Use brush holder with brush for
cleaning loose surfaces such as drapes,
-Hose Attach floor brush directly to
extension wand
Tetescopic
Wend
Extension
Wand
Floor
Brush
Use the floor brush for cleaning of floors
or stairs-
TO OPERATE SUCTION
CONTROL SLIDE
Telescopic Wand
When using attachmerUs for cleaning
draperies, small rugs with low pile and other
delicate items, twist the suction control slide
to the open position This slide is located on
the telescopic wand, close to the hose.
This wi reduce suction for ease of deanlng.
Suction
Control
iSt/de
Note: Return
suction control
slide to the dosed
position for normal
cleaning.
^CAUTION
When using attachments, be careful
not to overextend the stretch hose
when reaching. Trying to reach beyond
the hose stretch capability could cause
the vacuum cleaner to tip over.
12