Kenmore 116.28014 - Manual (Page 9)

OPERATING INSTRUCTIONS
HOW TO START
WARNING
Personal Injury and Product Damage
ncficcli U
« ALWAYS turn off the vacuum cleaner
before unplugging,
» The cord moves rapidly when
rewinding. Keep children away
and provide a clear path when
rewinding the cord to prevent
personal injury.
* DO NOT use outlets above counters.
Damage from cord to items in
surrounding area could occur.
Cord
Rewind
Button
1. Pull cord out
of canister to
desired length.
The cord will not
rewind until the
cord rewind but­
ton Is pushed.
NOTE: To reduce the risk of electric shock,
this vacuum cieaner has a polarized plug;
one blade is wider than the other. This plug
will fit in a polarized outlet only one way. if
the plug does not fit fully in the outlet,
reverse the plug, if It still does not fit, con­
tact a qualified electrician to install the prop­
er outlet Do not change the plug in any
way.
2. Plug the polarized power cord into a 120
Volt outlet located near the floor.
To rewind; Turn off
and unplug the vac­
uum cleaner. Hold
the plug while
rewinding to prevent
damage or injury
from the moving
cord. Push cord
rewind button.
Pita Haight
indicator
Handle
Release
Pedal
Pile Height Pedal
3. Lower wand from upright position by
pressing on the HANDLE RELEASE
pedal.
CAUTION
DO NOT leave the PowerMat©
running In one spot in the upright
position for any length of time.
Damage to carpet may occur.
4. Select a pile height setting by pressing
the HEIGHT ADJUST pedal on the rear of
the PowerMate. The pile height setting
shows on the indicator. See SUGGESTED
PILE HEIGHT SETTINGS.
Attention; Refer to your carpet manufac­
turers cleaning recommendations. Some
more delicate carpets may require that they
be vacuumed with the PowerMate agitator
turned off to prevent carpet damage.