Assembly tnstructions, Wand-telescoping, Powerwiate – Kenmore 116.28014 User Manual
Page 7: Assembly instructions -8, A warning
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
A
Please pay special attention to these hazard alert boxes, and follow any instruc
tions given. WARNING statements alert you to such dangers as fire, electric
shock, burns and personal injury. CAUTION statements alert you to such dangers
as personal injury and/or property damage.
ASSEMBLY tNSTRUCTIONS
A WARNING
Efectrical Shock Hazard
DO NOT plug Into electrical supply until
assembly Is complete. Failure to do so
could result in electrical shock or
injury.
Before assembling vacuum cleaner, check
the PACKING LIST on the cover of the
separate REPAIR PARTS LIST. Use this list
to verify that you have received all the
components of your new Ken mo re vacuum
cleaner.
WAND-TELESCOPING
The wand length
is adjustable and
requires no
assembly. To
adjust, simply
push or puli the
wand adjust but
ton and slide the
upper wand to
the desired
height.
Wand
Length
Adjust
Button
-Keep
Hand
Above
This
Tab
When adjusting the wand length you may
have to hold the PowerMate with your hand
or foot.
The swivel, located on
the PowerMate, allows
you to turn the handle
to the left or right side
to reach farther under
low furniture.
PowerWIate
Insert wand into PowerMate until the wand
button snaps into place.
To remove; Step on wand release pedal,
then pull up on wands.