Powerwiate care, Caution, Warning – Kenmore 116.28014 User Manual
Page 19: Belt changing and agitator cleaning, To remove belt
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
POWERWIATE CARE
Always follow all safety precautions when performing maintenance to the PowerMate.
CAUTION
Moving Parts! To
reduce the risk of
personal injury, DO
NOT touch the
agitator when the
vacuum cleaner is
ON, Contacting the
agitator while It is
rotating can cut,
bruise, or cause other injuries.
Always turn off and unplug vacuum
cleaner from electrical outlet before
servicing.
Use caution when operating this product
near small children.
WARNING
Electrica! Shock Or Personal Injury
Hazard
Always turn off and unplug vacuum
cleaner before performing maintenance
to the vacuum cleaner. Failure to do so
poiilfl
in plpnfrii'iil ehn/'k nr
personal Injury from vacuum cleaner
¡suddenly starting.
BELT CHANGING AND AGITATOR CLEANING
TO REMOVE BELT
Floor
Brush
Brush
RBÍeaso
Pedal
1. Remove floor
brush from the
PowerMate,
2. Turn
PowerMate
upside down and
unscrew five {5)
PowerMate cover
screws.
3. Turn PowerMate right side up,
4. To remove
cover, grasp the
side latches and
pul! out.
5. Unscrew two (2)
agitator cover screws
and remove agitator
cover.
6. Lift agitator
assembly out
and remove
worn belt.
7, Check and clean end cap areas. See
AGITATOR ASSEMBLY for picture of
complete agitator assembly
19