Agitator servicing, To replace agitator assembly, Warning – Kenmore 116.28014 User Manual
Page 21
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
AGITATOR SERVICING
WARNING
Electrical Shock Or Persona! Injury
Hazard
Always turn off and unplug vacuum
cleaner before performing
maintenance to the vacuum cleaner.
Failure to do so could result in electrical
shock or personal injury from vacuum
cleaner suddenly starting.
TO
writlUrv I nil DnUorltlo
When brushes
are worn to the
ieve! of the base
support bars,
replace the
agitator
assembly.
Base Support Bars
TO REPLACE AGITATOR
ASSEMBLY
1, Remove the floor brush from the
PowerMate,
2. Remove PowerMate cover, agitator cover,
belt and agitator assembly. See “To Remove
Beif in BELT CHANGING AND AGITATOR
CLEANING.
3. Replace agitator assembly.
4. Reinstall belt, agitator cover and
PowerMate cover. See 'To replace belt" in
BELT CHANGING AND AGITATOR
CLEANING,
5. insert tioor brush into PowerMate until
floor brush locks into place.
«
21