Suggested pile height settings, Attachments, Caution – Kenmore 116.28014 User Manual
Page 12: Attachments on handle, Attachments on wand, Contour brush
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
SUGGESTED PILE HEIGHT SETTINGS
For best deep down cleaning, use the XLO
setting. However, you may need to raise the
height to make some jobs easier, such as
scatter rugs and some deep pile carpets,
and to prevent the vacuum cleaner from
shutting off. Suggested settings are:
HI - Shag, deep pile, or scatter rugs.
MED - Medium to deep pile.
LO - Low to medium pile.
XLO ” Most carpets and bare floors.
ATTACHMENTS
CAUTION
DO NOT attach or remove handle or
wands while vacuum cleaner is ON.
THiKi
ctTkisiflf'lrin fiiiH
I 1 1 v M UIU
StlJMi |\ii I^ Oc I vl Ud.!11d
the electrical contacts or electronic
controls.
ATTACHMENTS ON HANDLE
NOTE: If the
PowerMate is
attached, turn
vacuum cleaner
off before
removing handle
from wands.
1. Press handle
quick reiease
button and pull
up on handle.
Handh
Lack
Button
Handle
Quick
RsiBBse
2. Slide attachments firmly
on handle as needed. See
ATTACHMENT USE
TABLE.
ATTACHMENTS ON WAND
1. To remove
wand from
PowerMate,
lock wand in
straight-up
position.
MU
Wand
Quick
Release
Pedal
2. Press wand
quick release
pedal with foot and
pui! the wand
straight up and out
of PowerMate.
3. Put attach
ments on wand
as needed. See
J^l jyj gU J
USE TABLE.
CONTOUR BRUSH
The contour brush will attach to the handle
or wand for overhead cleaning of furniture
such as cabinets and shelves.
1. Rotate the contour
brush and lock into
place.
2. Attach the contour
brush to the handle or
wand.
12