Kenmore 385.11607 User Manual
Page 8
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
SECTION 2. PREPARE THE MACHINE FOR SEWING
» Setting Spool Pin
» Adjust the Presser Foot Lever
• Thread Cutter
The
spool
pins
spools
of
thread
machine.
are
used
for
holding
the
when feeding thread to the
To use, pull up the spool pins. Push down
for storage.
NOTE: Model 11607 has one spool pin.
The
Presser
Foot
Lever
raises
and
lowers
your
presser foot.
You can raise it about 1 /4" higher than the normal
up position for easy removal of the presser foot or
to help you place heavy fabrics under the presser
foot.
You don't need a pair of scissors to cut the
thread
after
you
finish
sewing.
Just
use
the
handy thread cutter.
Pull
the
threads
to
lengthen
several
inches
before starting the next seam.