Kenmore 385.11607 User Manual
Page 7
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
SECTION 2. PREPARE THE MACHINE FOR SEWING
Set Up the Machine
• Plug in the Machine and Switch on the Power
® Foot Control Use
machine,
be
sure
the
power
switch
is
OFF.
1.
Check your outlet to be sure it is a 110 to 120
Volt AC outlet,
2.
Insert
the
machine
plug
into
the
three-prong
plug
connector,
as
shown.
It
will
only
fit
one
way.
3.
Insert the power supply plug into the outlet.
SAFETY FEATURE:
Your
machine
will
not
operate
unless
the
light/power
switch
is
turned
on.
If
you
are
interrupted
or
stop
sewing,
turn
off
the
light/power
switch
to
prevent
injury
to
children.
which you sew.
To
increase
speed,
gently
press
down
with
the ball of your foot.
To
decrease
speed,
release
your
foot
pres
sure slightly.
NOTE:
The foot control is sensitive and
will
increase
or
decrease
your
sewing
speed
immediately.
Practice
on
a
scrap
of
fabric
to
regulate
your
sewing
speed
to
your taste and needs.