Kenmore 385.11607 User Manual
Page 14
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
SECTION 2. PREPARE THE MACHINE FOR SEWING
• Pick Up the Bobbin Thread
handwheel
toward
you
one
complete
turn.
back
of
the
presser
foot,
leaving
4
to 6 inches of thread clear.
If you cannot pick up bobbin thread by following steps given above, then check;
1.
Is needle threaded from front to back?
2.
Is thread tangled around needle?
3.
Are 3 to 4 inches of thread coming from the shuttle?
4.
Is thread from shuttle tangled?
5.
Is bobbin properly installed in the bobbin case?
6.
Is the machine threaded according to the instructions?
12
This manual is related to the following products: