Casio EX-S880 - Manual (Page 99)

99
SHOOTING A MOVIE
6. Use [ W] and [X] to select the MOTION PRINT
setting you want and then press [SET].
■
Shooting a Short Movie
1. With the camera pointed at the subject, press
[
].
This will shoot a Short Movie of the length you specified and
then stop shooting automatically.
To stop shooting before the specified time is up, press [ ]
again.
IMPORTANT!
• Movie data is continually recorded and stored in a buffer
before you press [ ]. Keep the camera pointed at the
subject. Then at the right moment, press [ ]. When you
press [ ], the remaining recording time of part two of the
Short Movie counts down on the monitor screen.
• The following operations are performed automatically to
protect the camera against damage whenever the camera
temperature exceeds a preset level during movie
recording.
– Monitor screen brightness setting changes to 0.
– “ALERT” appears on the monitor screen and Short
Movie recording is disabled.
If this happens, turn off the camera and wait until it cools
down before trying to use it again.
To do this: Select this setting:
Create a snapshot with nine
movie frames, with the one
recorded when [ ] is
pressed in the center
9 frames
Create a snapshot of the
frame recorded when [ ]
is pressed
1 frame
Turn off MOTION PRINT Off