Inserting the battery, 17 charge the battery, Remove the battery – Canon A4050 IS User Manual
Page 17: Open the cover
Initial Preparations
17
Charge the battery.
z
For CB-2LD: Flip out the plug (
) and plug
the charger into a power outlet (
).
z
For CB-2LDE: Plug the power cord into the
charger, then plug the other end into a power
outlet.
X
The charging lamp turns orange and
charging begins.
X
When the charging is finished, the lamp turns
green.
Remove the battery.
z
After unplugging the battery charger, remove
the battery by pushing it in (
) and up (
).
Insert the included battery.
Open the cover.
z
Slide the cover (
) and open it (
).
CB-2LD
CB-2LDE
•
To protect the battery and keep it in optimal condition, do not charge
it continuously for more than 24 hours.
•
For battery chargers that use a power cord, do not attach the charger
or cord to other objects. Doing so could result in malfunction or
damage to the product.
•
For details on charging time and the number of shots and recording time
possible with a fully charged battery, see “Specifications” (p. 38).
Inserting the Battery
A4000 IS A3400 IS A2400 IS
A2300