Braeburn 2220NC - Manual (Page 12)

Status Indicators
Status indicators appear in the display to let you know if your system is
heating, cooling or off.
HEAT ON Indicates that your heating system
is running.
COOL ON Indicates that your cooling system
is running.
SERVICE Indicates that a user selectable
service reminder was selected
(see “Service Filter Monitor, page 8).
Additional status indicators (Model 2220NC Only):
AUX Indicates that the auxiliary stage of heating is running
(multi-stage systems only).
EMER Indicates that the emergency heating system is running (heat
pump systems only).
Program Event Indicators
Program Event Indicators appear in the display to let you know what part
of your current program is active. The 4 different program event indicators
are MORN, DAY, EVE and NIGHT.
When the program event indicator is flashing, your program has been
temporarily bypassed and will resume at the next scheduled event.
Note: You will not see a program event indicator while in HOLD Mode.
Resetting the Thermostat
This thermostat provides you with a reset button that will erase all of your
user settings and 5-2 day programming.
To reset the thermostat, use a small object such as a tooth pick or paper-
clip and gently press the button located inside the small hole on the front of
the thermostat housing labeled “reset”.
8 Additional Operation Features
Compressor Protection
This thermostat includes an automatic compressor protection delay to
avoid potential damage to your system from short cycling. This feature
activates a short delay after turning off the system compressor.
11