Braeburn 6400 Installer Guide - Manual (Page 9)

9 Installer Guide
Thermostat TouchPads
TM
NOTE: Thermostat TouchPads are located on the left, right and bottom portions of the display screen. They are
the “touch sensitive” segments used to adjust your thermostat. Depending on the equipment installed, all touch
pads may not show.
SYSTEM Selects AUTO (Heat/Cool), COOL, OFF HEAT or EMER (Emergency Heat)
FAN Selects AUTO, ON, CIRC (Circulation) and PROG (Program) fan modes
PROG Selects programming mode or press for 3 seconds to select SpeedSet ® mode
HOLD Enters / Exits the HOLD mode (program bypass)
DAY/TIME Sets the current time and day of the week
BACK
Moves back in setting and programming modes
NEXT Moves forward in setting and programming modes
RETURN Returns to normal mode from program or settings modes
OUTDOOR Displays the outdoor temperature if a Braeburn
® outdoor sensor is installed
HUMIDITY Displays or adjust the current humidity level (6400 only)
CONFIG
Enters the User and Installer settings modes
CLEAN Enters a brief screen cleaning mode
RESET RESET