Behlen 62175882 - Manual (Page 6)

5.1 Trailer Hookup Instructions
1. Back the trailer manually into
the slotted brackets located at
the rear of the chute.
2. Hook the cable to the bracket
located on the headgate base.
3. Turn the crank until the chute is
flush against the bottom of the
trailer.
4. Slide the 1” diameter
into the brackets and insert
the safety clips.
F-19394 5 9-1-99
M1 CHUTE ASSEMBLY & OPERATION
Step 2
Step 3
Step 1
CAUTION: NEVER
TRANSPORT THE
CHUTE WITH
TENSION ON THE
CABLE.
After the chute is loaded, take the
tension off the cable and winch.
Step 4