BASO G96 Series CE Approved Gas Valve - Manual (Page 6)

6 G96 Series CE Approved Gas Valve Installation Instructions
Technical Data (continued)
Agency Listings CSA (AGA/CGA) Certificate Number 229521-1656041
EC Type Examination Certificate Number EC-86/10/062
Specification Standards EN 126 and EN 161
Standards Complying with EMC Directive
Standards Complying with Low Voltage Directive
ANSI Standards Z21.21 and Z21.78
Canadian Standards CAN1-6.5 and CAN1-6.20
Performance specifications are nominal and conform to acceptable industry standards. All agency certification of BASO products is
performed under dry and controlled indoor environmental conditions. Use of BASO products beyond these conditions is not recommended
and may void the warranty. Product must be protected if exposed to water (dripping, spraying, rain, etc.) or other harsh environments. The
original equipment manufacturer or end user is responsible for the correct application of BASO products. Consult BASO Gas Products LLC
for questionable applications. BASO Gas Products LLC shall not be liable for damages or product malfunctions resulting from
misapplication or misuse of its products.
Refer to the G96 Series CE Approved Gas Valve Product Bulletin (BASO-PB-G96GLOBAL) for necessary information on operating and
performance specifications of this product.
1007 South 12th Street
PO Box 170
Watertown, WI 53094
www.baso.com
1-877-227-6427 (1-877-BASOGAS) Printed in U.S.A.