Avlink HDMI-E8 - Manual (Page 70)

Distribution Amplifier (DA)—User Manual
69
Firmware Upgrade
Before upgrading firmware, you have to receive a Firmware burn package containing all
software needed for burning. Follow the steps as below to upgrade the HDMI Extender
(HX-RW) firmware:
1. Connect the power cord to the power port on the panel of HDMI Extender (HX-RW).
The other end of the power cord connected to a suitable power source.
2. Connect the control PC and HDMI Extender (HX-RW) with a RS-232 cable.
3. On the control PC, decompress the Firmware burn package file.
4. Process the UpdateRX_xxxx.bat file to upgrade HDMI Extender (HX-RW) firmware.
(xxxx is specified for firmware version)