Avlink HDMI-E8 - Manual (Page 39)

Distribution Amplifier (DA)—User Manual
38
Figure 7-11 Memory Configuration Status
When input corresponding to Output is enabling, it shows the Output ports correspond to
the Input ports; when they are disable it will show red “None” in the relative field.
7.2.6 Options Function
Activation Function:
In the main configuration menu, select Options to prop-up the Options Window as
shown in Figure 7-12（a）
Figure 7-12 Options（a） Figure 7-12 Options（b）
Function Description:
Linking Methods:
In “Port number” select one of the COM ports as shown in Figure
7-12（b）for an example; in “Baud rate” select 9600 for signal transmission as shown in
Figure 7-12（a）
7.2.7 Communication Protocol/Control Command Code
Communication Protocol: Baud rate 9600bps, no odd or even calibration bit address,
8bit transmission address, 1bit stop address. Please refer to Appendix D RS-232
Communication Protocol
.
Also see the “Command list.pdf” in the CD-ROM for more
relative Command Code information.