Avlink HDMI-E8 User Manual

Page 41

Distribution Amplifier (DA)—User Manual

Upgrade: Use for firmware upgrade. For more information, refer to

Appendix C

Firmware Upgrade .

Options: Allow you to configure the IP address.

Save: Click this button to save the connected combinations output and input ports. It

also includes the present input/output switching relations and all settings. (Only for
Matrix Switcher Series.)

All Output: A Hot Key for you to set the same value to all

output channels.

AV Link: Link between audio and video.

Key In: A Hot key that is for key in the value 0~99 quickly. After setting the value, click

“Enable”

to take effect. For HDMI-E8 is useful from 1 to 8 values upon 8 output ports

and HDMI-E16 is useful from 1 to 8 values upon 8 output ports.

Previous and Next: If the connections of your Matrix Switcher are over to 8 devices,

you can click “Previous” or “Next” to view the console list by paging.

7.3.1 Audio Configuration (Not Support for DA)

For audio configuration, click Audio button directly to pop-up “Audio Settings” window.

Figure 7-14 Audio Configuration

In “Audio Settings” window, you can select output port from the drop-down list. If you
want to mute the volume, please select the Mute check box. You can also adjust the

Subwoofer, Bass, Treble

or Lip-sync value here.

If the device does not support audio function, it will appear “---”.

Figure 7-15 Audio Settings

This manual is related to the following products:

HDMI-E16