Avlink HDMI-E8 - Manual (Page 29)

Distribution Amplifier (DA)—User Manual
28
) The Device ID is based on the DIP of switcher located on the rear panel.
Slide the scrollbar on the lower left area of main window to view all contents (including ID,
Name, A/V, I/O (only for VO/AO reference), Memory, VI Plug, AI Plug, VO Plug, AO Plug,
EDID Type, Volume, Bass, Treble, Subwoofer, Delay, Delay Unit, Max Delay and Version)
as described below:
ƒ ID: Specify the ID address of Distribution Amplifier (DA).
ƒ Name: The name of Distribution Amplifier (DA).
ƒ A/V: Specify the character of audio or video. Or both of audio and video are supported
will show “Both”. (For this Distribution Amplifier (DA) only supports video.)
ƒ I/O: Ports quantities of Input and Output.
ƒ AI/VI Plug: Enable to detect the status of all input ports for audio/video. (For this
Distribution Amplifier (DA) only supports one input port.)
ƒ AO/VO Plug: Enable to detect the status of all output ports for audio/video.
ƒ Version: Show the version information of Distribution Amplifier (DA).
The functions as below are not supported for Distribution Amplifier (DA):
ƒ Memory: Show the quantities of memory sets.
ƒ EDID Type: FIX (fix mode) and TV1 (access the first output channel) selection key.
- FIX mode:
The Matrix Switcher will supply a set of fixed EDID values to support
up to only 1080P high performance TV.
- Output1 mode: The Matrix Switcher will access the EDID values of high
performance TV that connected to the first output channel, and copy the EDID
value to all the input channels so that the DVD player can support to all the
HDTV.
ƒ Volume/Bass/Treble/Subwoofer: Show the Volume/Bass/Treble/Subwoofer function
is Enable or Disable.
ƒ Delay: Show whether Enable or Disable the multimedia output delay time function.
ƒ Delay Unit: Show the delay time of multimedia output. The unit for delay time is “ms”.
ƒ Max Delay: Show the maximum permissive delay time. The unit for maximum delay
time is “ms”.