Avlink HDMI-E8 - Manual (Page 31)

Distribution Amplifier (DA)—User Manual
30
When the device name located on the left of main configuration window is empty, you
can click the Scan to research and update the device ID and Name and other related
information. End the Scan function by pressing the Scan again during scanning
process. And the left of main configuration window will show you the detected
information presently.
ƒ Options: Allows you to configure the Port number and Baud rate.
ƒ Exit: Click this button to exit the configuration window.
ƒ Save: Click this button to save the connected combinations both output ports and input
ports into the memory set. (Only for Matrix Switcher Series.)
ƒ Load: Click this button to retrieve the previously saved settings. (Only for Matrix
Switcher Series.)
For more information and operations, please refer to next chapters.