Avlink HDMI-E8 - Manual (Page 50)

Distribution Amplifier (DA)—User Manual
49
Appendix B IR Mini-Controller (Optional)
The Distribution Amplifier (DA) supports an IR Mini-Controller to allow you to select
input channel through infrared sensor upon an extended connection – HDMI Extender
(HX-RW). The signal for IR Mini-Controller is only available to the IR Receiver
connected to the IR1 IN or IR2 IN port of HDMI Extender (HX-RW). If there are over 2
IR Receivers receive the signal, all of them will be switched to the same selected input
simultaneously. In order to avoid the event occurs described above, you can configure
the positions of your IR Receivers based on different environments.
ƒ 0 and 1 keys are used for select channel.
ƒ Press Power key to switch to “0” (OFF).
ƒ Other keys are useless.