ALTANA BYK-mac i ROBOTIC Manual User Manual

Page 18

background image

17

Calibrate

7.2 Calibration Notes

• The standards should be cleaned periodically.

For cleaning procedure see section "Cleaning

and Maintenance“. Please make sure that the

standards are not scratched.

• Do not move the instrument while taking a

calibration measurement. If motion is detected,

an error message will be displayed and

calibration is aborted.

• When moving from cold to warm environment,

there is a danger of condensation. For this

reason, you should wait for an appropriate

amount of time to allow the optical components

to adjust before calibrating and using the unit.