ALTANA BYK-mac i ROBOTIC Manual - Manual (Page 14)

13
Power supply
4 Power supply
The instrument is supplied by an external AC power
adapter.
Power supply and data transmission are combined
in a 9-pole sub D plug.
In order to connect the measuring instrument, first
check the wiring and the matching of the power
supply.
Then plug in the emergency stop plug (1).
Subsequently plug in the sub D plug (2), and switch
on power.
The light-emitting-diode LED1 signals the connected
power supply.
The light-emitting-diode LED2 is green during the
measurement.
If an error occurs during measurement, it is
signalled by a red blinking light-emitting-diode
LED2.
LED2 LED1
1
2