ALTANA BYK-mac i ROBOTIC Manual - Manual (Page 12)

11
Mounting and Manual Measurements
3. Mounting and Manual Measurements
Before operating the instrument for the first time,
please read the operating manual and take
particular notice of the Safety Instructions.
3.1 Mountig of instrument
The measuring instrument is fixed on the mounting
board with three screws (arrow).
The millings on the fixing bar and a nib ensure
proper attachment.
A drawing, that contains all dimensions for
producing the mounting board, is enclosed with
each instrument. The drawing also describes the
measurement plane.
In order to be able to do the fine positioning of the
instrument, a prepositioning to < ± 2 mm distance
to the measurement plane is necessary.
The 4 pins measure the distance to the surface and
pass this value as well as the tilting and transverse
angle on to the robotic control.
Attention must be paid to the measurement
direction (see illumination direction on instrument
housing).