Agasio A622W User Manual
Page 49
Page | 48
713-893-4514
Transport Layer Security Protocol
– This protocol differs between e-mail providers, check with your
provider to see if you should use TLS, STARTTLS, or None.
Need Authentication
– Usually you will need to have this checked, once you check it, two new fields will
drop down that read “SMTP User” and “SMTP Password,” you would put in your e-mail account
username and password in these fields. For example, w
e would put “Agasio” (without the @gmail.com at
the end) into the SMTP User field and the password into the SMTP password field.
Note:
Please make sure to push “Submit” before pushing “Test.” Once you push “Submit” you can then
test the e-mail by pushing t
he “Test” button.
Figure 17.2
– The FTP Service Settings
FTP Settings are similar to the E-
mail alert settings. For the majority of FTP’s you will have to contact
your FTP provider for the server and port information.
Most FTP servers use port 21. FTP Mode has two different values, either PORT or PASV. Check with
your FTP provider to see which mode is used. When an alarm is triggered by the camera, images will be
sent directly to the FTP server, similar to the E-mail alert settings.