Agasio A622W User Manual
Page 36
Page | 35
713-893-4514
Under the “Private Port” category, simply put the port 99 again (your port may be different).
Click on the “Apply Changes” button to save the changes.
Figure 15.2
– An example of what the port forwarding should look like within a Belkin router
After this is done your camera should be set up to be remotely viewed! You can double check if your port
is forwarded by going t
and typing in your port and checking that way.
To see if you can access your camera with the external IP address, find out your external IP address by
going
The IP address there is your external IP address, which you will
use in your URL bar along with the port number to access the camera from any browser or on your smart
phone using 3G or 4G.
Figure 15.4
– An example of an external IP address. Use this along with your port number to
access the camera remotely on any browser or smartphone.
For example, we would type in our browser the following: “50.79.253.205:99” and push Enter. This
should take us to our camera. Remember to always add a colon and the port number after the external IP
address.