Agasio A622W - Manual (Page 22)

[email protected] Page | 21 713-893-4514
10. Administrative Settings
When logging in as an Administrator, you have the ability to alter or change options other users
cannot change.
Administrator privileges allow access to all of the settings and operations of the camera; you can
set and control it freely. Some of the special options solely for administrators are listed below:
Alias Settings: You can name the IP camera to any name you see fit. To find this option, hover over
“Device Settings,” and click “Alias Settings.”
Date & Time Settings: Allows you to set the date and time. To find this option, hover over “Device
Settings,” and click “Date & Time Settings.”
Access Control Settings: Allows the administrator to add up to 8 different users that can log into the
camera using their own login information. On this page you can set up
each accounts’ username,
password, and their access control (if they will be administrators, visitors, or operators).
 Visitors: Users with visitor access can only view the live video of the camera.
 Operators: Users with operator access can pan and tilt the camera using the navigational circle, set
the video screen’s brightness, contrast and other parameters.
 Administrators: Users with administrative access have the ability to set device settings and
advanced configurations.
Device Firmware Upgrade: Allows upgrading the firmware of the camera. You can find this option by
hovering over “Device Settings,” and clicking “Upgrade Device Firmware.”
Restore Factory Settings: If there is an error experienced or the camera has some unknown problem,
this button will allow the camera to be reset back to its default settings. Note that this will also erase
wireless settings, which will need to be reinserted once the camera is reset. You can find this option by
hov
ering over “Device Settings,” and clicking “Restore Factory Settings.”
Reboot Device: This option simply reboots the camera. You can find this option by hovering over “Device
Settings,” and clicking “Reboot Device.”