Agasio A622W User Manual
Page 21
Page | 20
713-893-4514
This setting changes the image resolution.
This setting changes the image frequency.
This setting changes the image brightness.
This setting changes the image contrast.
This button resets all main menu options to factory default.
Clicking this button will start a manual recording which will
record to the folder you have specified. To change where videos
are saved, hover over “Path Settings,” and click “Record Path.”
This button takes a snapshot of the current screen and opens it in
a new tab where it can be saved manually to your computer.
This option enables User-to Camera audio. If the operator on the
computer has a microphone enabled on the computer, it can be
used to talk into the camera, and the sound will be heard from the
camera speakers.
This option enables Camera-to-User audio. If the operator on the
computer has speakers connected and configured to the PC,
clicking this option will allow them to hear audio from the location
of the camera.
This option
can be set to keep the camera’s network indicator
LED light on or off (the LAN cable lights on the back of the indoor
camera).
It can be found by hovering over “Device Settings” and
clicking “Indicator Settings.”
These options enable Single view, Four-screen view, or a Nine-
screen view. This function serves no purpose unless you have
more than one camera connected and configured to your
interface. * Please refer to section 15. Multi-Device Settings*
This feature is only supported by the PTZ IP Camera. Use these
buttons to zoom in and out.