Acura 2008 RDX - Owner's Manual - Manual (Page 76)

To change the display, press the
SEL/RESET button or INFO (
/
) button on the steering wheel
repeatedly until the desired
information appears (see page
).
You can also change the display by
pressing the Select/Reset knob in
the instrument panel.
When you turn the ignition switch to
the ON (II) position, what you last
selected is displayed.
In the multi-information display, the
system message is also displayed
(see page
) and you can
customize your vehicle control
settings (see page
).
The multi-information display in the
instrument panel displays various
information and messages when the
ignition switch is in the ON (II)
position. Some of the messages help
you operate your vehicle more
comfortably.
Others help to keep you aware of the
periodic maintenance your vehicle
needs for continued trouble-free
driving.
When you open the driver’s door, a
‘‘Welcome’’ message is shown on the
multi-information display. When you
turn the ignition switch from the ON
(II) position to the ACCESSORY (I)
position, a ‘‘Goodbye’’ message is
shown on the display.
73
77
80
Multi-Information Display
72
SEL/RESET
BUTTON
INFO BUTTONS
2008 RDX
Table Of Contents Main Menu