beautypg.com

Lights – Acura 2008 RDX - Owner's Manual User Manual

Page 356

background image

Remove the two screw covers on
the light assembly by prying on
the side edge with a flat-tip
screwdriver.

Remove the screws with a Phillips-
head screwdriver, then remove
the light assembly from the
tailgate.

Install the new bulb into the hole
and turn it one-quarter turn
clockwise to lock it in place.

Push the electrical connector back
onto the bulb. Make sure it is on
all the way.

Turn on the fog lights to test the
new bulb.

Put the undercover in place.
Reinstall the clip, and tighten the
screw securely.

Remove the electrical connector
from the bulb by pushing on the
tab and pulling the connector
down.

Remove the bulb from the fog
light assembly by turning it one-
quarter turn counterclockwise.

5.

6.

7.

8.

1.

2.

3.

4.

Lights

Replacing a High-mount Brake
Light Bulb

352

COVERS

SCREWS

CONNECTOR

BULB

2008 RDX

Table Of Contents

Main Menu