beautypg.com

Wiper blades – Acura 2008 RDX - Owner's Manual User Manual

Page 361

background image

CONTINUED

Examine the new wiper blades. If
they have no plastic or metal
reinforcement along the back
edge, remove the metal
reinforcement strips from the old
wiper blade, and install them in
the slots along the edge of the new
blade.

Install the new blade onto the
blade assembly:

Find two tabs with a ‘‘SET’’ and
‘‘

’’ mark on the wiper blade

assembly. This is the direction you
install.

Slide the blade onto the assembly
until it is locked by the tabs.

Remove the blade from the blade
assembly:

Pull out the blade by grabbing
the end of the blade as shown
above illustration.

Find two tabs with a ‘‘SET’’ and
‘‘

’’ mark on the wiper blade

assembly. The opposite side of
the ‘‘

’’ mark is the direction

you pull out the wiper blade.

5.

3.

4.

Wiper Blades

Ma

int
e

na
nce

357

REINFORCEMENT

BLADE

BLADE

TABS

2008 RDX

Table Of Contents

Main Menu